https://JOBS.NESC.COM/ en-us Job Title: RF Engineering Manager

Job Location: Topsfield, MA (100% onsite)

 
Responsibilities

• Responsible for overall coordination of efforts, including making job assignments for RF Engineering personnel and keeping applicable executive(s) informed as to personnel requirements.
• Maintains a working liaison with personnel assigned to other portions of the project as required for proper coordination of RF Engineering, Manufacturing, Planning and Test resources.
• Responsible for the review and approval of all RF Engineering design.
• Contributes heavily to the design approach and to the ingenuity employed, as needed.
• Responsible for the preparation and submission of Estimates to Complete (ETC), status reports and technical reports on assigned projects on a timely basis.
• Ensures that all stages of the project are properly documented by reports, drawing, photographs, etc., as applicable, to ensure reimbursement for works accomplished and to safeguard proprietary rights.
• Upon request, prepares estimates for work to be performed in the department. Reviews estimates prepared by subordinates.
• Prepares schedules for work and ensures that all commitments are met on time. Drives the growth of the Company through improvements in processes, procedures and capital equipment acquisitions.
• Manages costs within allocated budget limits and informs applicable executive as to costs incurred on projects.

Qualifications

• Bachelor's Degree in Electrical Engineering (BSEE) or equivalent and a minimum of 9 years prior RF microwave design and development experience. Master's degree and a minimum of 7 years prior RF microwave design and development experience.
• Proficiency using RF / EM simulation software, ADS, HFSS or equivalents.
• Proficiency generating schematics, PCB layout, and hands-on experience evaluating, testing, tuning, and modifying circuits to meet specifications.
• Proficiency using test equipment such as network analyzers, spectrum analyzers, power meters, oscilloscopes.
• Costpoint, ERP systems, Microsoft Office proficiency

 

PREFERRED ADDITIONAL QUALIFICATIONS:

• High power control component design and hands-on experience with both packaged surface mount components and bare die.
• Experience with AutoCAD, and PADS is a plus.
• Familiarity with EMI/EMC testing per MIL-STD-461 is a plus.
• Experience with circuits operating up to 40 GHz is a plus.
• Ability to obtain Secret Security Clearance.

 

To conform to U.S. Government export regulations, the applicant must be a U.S. Citizen, lawful permanent resident of the U.S. (e.G. Green Card holder), or a protected individual as defined by the International Traffic in Arm Regulations (ITAR).
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 IT Support Specialist

 

The IT Technology Support Specialist plays a critical role in ensuring the smooth operation of IT systems and providing exceptional technical support to end-users. This individual will be responsible for troubleshooting hardware and software issues, managing support tickets, and assisting with the deployment and maintenance of technology solutions across the organization.

KEY RESPONSIBILITIES
•Provide first and second-level technical support for desktops, laptops, mobile devices, printers, and other peripherals.
•Respond to and resolve help desk tickets in a timely and professional manner.
•Install, configure, and maintain hardware and software systems.
•Assist with onboarding and offboarding of employees, including provisioning and deprovisioning of accounts and devices.
•Support remote users with VPN, Microsoft environments, and collaboration tools.
•Maintain accurate documentation of support procedures, asset inventory, and user guides.
•Collaborate with IT team members on projects, upgrades, and system improvements.
•Ensure compliance with IT policies, security standards, and data protection protocols.
•Escalate complex issues to appropriate internal or external resources when necessary.

QUALIFICATIONS:
•Excellent communication and customer service skills.
•Interest in technology, a desire to learn and question, analytical mind for further responsibilities and growth.
•Solid organizational skills and focus on accuracy and attention to detail. •Strong problem solving and troubleshooting abilities.
•Self-motivated with the ability to work independently and in a team environment.
•Excellent written and oral communication skills.
•Ability and willingness to document work, processes, procedures, or work instructions.
•Work with a team to achieve timely resolution of all production issues meeting or exceeding Service Level Agreement.
•Flexible schedule to support after hours support and maintenance as needed.
•Ability to lift and move equipment up to 40 lbs. 

TRAINING AND EXPERIENCE:
•2+ years of experience in a technical support or help desk role.
•IT certifications such as CompTIA A+, Network+, or Microsoft Certified Professional (MCP).
•Experience with ticketing systems (e.G., ServiceNow, FreshDesk, Zendesk).
•Knowledge of cybersecurity best practices and data privacy practices. •Proficiency with Windows, Microsoft 365, Azure, Intune, and common business applications.
•Familiarity with networking concepts, Active Directory, and using remote support tools and users effectively
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 SMT Operator 

$23.00

Responsibilities:

• Set up, maintain and operate SMT equipment (Pick &Place, Screen Printer and Reflow oven)
• Perform cycle counts for inventory control
• Perform visual inspection of units prior to running product through surface mount oven
• Identify electronic components by type and numerical markings
• Install required compononents in machines and operate machines
• Place some SMD by hand
• Perform minor daily maintenance to equipment
• Identifies non-reworkable issues to the supervisor and routing of non-conforming material to the supervisor
• Maintain proper inventory controls and perform cycle counts as directed by supervisor

 

Qualifications:

 

Education:      High School

 

Experience:     1 –3 years, prior experience in the operation of SMT Equipment in a manufacturing environment. Operator must be able to stand for 6-8 hours per shift and lift up to 25 lbs.

                                           

Skills:               Must be able to follow written and verbal instructions

Work with minimum supervision

                             Excellent communication skills
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Repair Technician


The Role

The Repair Technician is responsible for efficiently receiving, testing, repairing, and dispositioning of company products. This role involves maintaining a clean and professional workspace, as well as keeping an accurately inventoried and organized cache of replacement parts for both legacy and currently active product lines.

Job Duties

    Prioritize activities independently based on legacy and current product repair inventory, internal and external customer needs, and the queue of returned products awaiting processing.

    Perform diagnostic testing on mechanical and electronic equipment, including but not limited to modules, controllers, frames, and auxiliary components.

    Repair, scrap, or accept products "as is" after diagnostic testing and root-cause analysis.

    Assist in implementing corrective and preventive actions as needed.

    Research and obtain necessary equipment specifications, test procedures, diagnostic information, and any required documents and guides for processing.

    Perform equipment hardware and software configurations independently as needed.

    Catalog and inventory all products returned for repair while maintaining a clean, well-organized, and efficient work area.

    Maintain an inventory of standard replacement parts and submit purchase requisitions to ensure minimum inventory levels are stocked.

    Lead standard and project-specific workgroups as needed.

    Follow all safety and ESD procedures to ensure personal and product safety.

    Align performance with assigned KPI goals, both individually and for the team.

    Perform additional duties as assigned.

 

 

Skills and Qualifications

     Strong organizational skills, problem-solving, and attention to detail

     The ability to manage multiple priorities and be comfortable working under pressure

     Self-motivated and able to work in a team environment to recommend and implement opportunities for increased IT and manufacturing efficiencies

     Must have a broad mechanical understanding of repair or manufacturing assembly/disassembly functions

     Ability to read and interpret documents such as safety rules, operating and maintenance instructions, wiring schematics, and procedure manuals

     Adept at problem-solving and troubleshooting computer hardware and or software-related issues

     Ability to provide feedback to department manager on procedure updates or changes, provide routine reports and correspondence

     Ability to speak effectively before groups of customers or employees

     Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form

     Experience soldering PCBAs

     Ability to read electrical schematics and design drawings

 

Education

     High school diploma or GED and one to two years related experience and/or training;or equivalent combination of education and experience.

     Preferred qualifications, in-process or equivalent experience:

    Technical School

    OEM approved training for desktops, laptops, PCBAs, point-of-sale equipment, etc.

    A+/ICET/Networking Certification

    Test Eng. Assoc. Degree or equivalent experience.

    Working knowledge of computer programs (ERP) for entering data and tracking inventory.

    Prior PC-related experience is helpful/ preferred.

Physical Requirements

     Must be able to sit or stand for long periods

     Close visual focus is required

     Fine and/or gross motor skills, including the ability to grasp, lift, and/or carry or otherwise move packages on a standard wheeled cart with a load capacity of 100 lbs.
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 CNC Manufacturing Technician

 

About the Job

 

The CNC Manufacturing Technician is responsible for operating our newly expanded automated CNC equipment where we produce aluminum frames. The right candidate will work diligently to assure that all products are manufactured with integrity and free of error. Company is growing rapidly and can provide great individual growth opportunities for motivated employees that possess our core values.

 

Job Duties

 

    Properly startup and shutdown CNC equipment

    Efficiently load and unload CNC equipment with unprocessed and processed parts

    Diligently monitor machine performance, performance basic troubleshooting activities and escalate issues through chain of command

    Manually deburr parts and manually assemble aluminum frames with fixtures and screw guns

    Perform timely basic daily and weekly preventive maintenance on the machines

    Maintain a clean and organized workcell

    Follow all safety requirements and raise safety concerns to the Safety Committee when observed

    Follow written and oral instructions and provide process feedback for continuous improvement

    Perform additional duties as assigned

 

Skills and Qualifications

    High school diploma or GED

    1 year of manufacturing experience

    CNC experience preferred

    Flexibility to work in different manufacturing work cells as needed

    Self motivated

 

Physical Requirements

    Fine and/or gross motor skills, including the ability to grasp, lift and/or carry or otherwise move packages on a standard wheeled cart with a load capacity of up to 100lbs

    Be able to lift up to 50lbs

    Ability to stand for duration of shift

    Close visual focus required
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Onsite 5 days/week - Charlotte, NC OR Orlando, FL - local candidates only (We have added the Tampa and Jacksonville Florida)

 

)Typically a minimum of 2 years related work experience.-collaborate with multidisciplinary project teams within the Water & Industrial Water Market Sector, supporting Governments & Communities

(G&C) projects and building critical infrastructure for today's and tomorrow's challenges. Civil professionals contribute to site development efforts, including grading and drainage, erosion control, roadways, fencing, and underground utilities.

The Virtual Design & Data Solutions (VDDS) Associate Engineering Technician plays a key role in supporting the development of high quality engineering deliverables for these complex infrastructure projects. Under general supervision, this position performs technical tasks requiring intermediate knowledge of engineering principles and practices, with a focus on creating and modifying site development plans using industry standard design tools, such as Autodesk Civil 3D and/or Bentley MicroStation.

Required:

 Autodesk Civil 3D and/or Bentley MicroStation

 Basic Civil 3D experience with knowledge of alignments, pipe networks, plan/profile, and sections.

 Basic Civil 3D experience with proposed grading and surfaces.

$25-$37/hr.
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 NESC is currently seeking a full-time Project Engineer for our North Attleboro location. This person will be responsible for both Project Management and Engineering/Design aspects of key high-specification projects, and will have overall responsibility for the successful completion of projects under their direct management. Depending on project needs, this may require performing aspects of both positions or coordinating with Project Managers and Engineers/Designers to accomplish tasks.

Job functions include, but are not limited to:

• Coordinating mechanical design, electrical design, and programming for projects
• Occasional modelling and drawing in PTC Creo
• Research and specify purchased components to meet system requirements.
• Review specifications and ensure design meets all applicable specifications and standards.
• Processing department-related nonconformances when required.
• Managing complex projects for key customers, government agencies, and/or classified as NQA1.
• Creating design verification documentation, including forms required by quality programs.
• Meeting with customers to define and clarify objectives and deliverables per detailed contract specifications. 
• Creating and managing project schedules, including key project milestones and critical path tasks, and progress payments
• Providing leadership and guidance to the project team, including members from the production, electrical, service, quality, and sales departments on all matters related to project schedules and deliverables.
• Communicating efficiently and effectively the key dates and activities that must be completed to ensure a successful result.
• Following up on actions assigned to team members for confirmation of completeness and accuracy.
• Learn and clearly understand the Navision ERP system's functionality.
• Escalate problems in a timely manner to address potential pitfalls and impediments to schedule completion.
• Attend department meetings and provide detailed project information to management.
• Support the sales team during the quotation phase when required. This includes job costing and producing project timelines.
• Enter drawing packages into the ERP system to create the bill of materials (BOM).
• Work with suppliers to secure quotes for all custom, fabricated, and purchased parts. Select the best option for fabrication partners among approved suppliers qualified to fabricate custom parts.
• Create and send installation requirements to the customer.
• Domestic and international travel as required.
• Any other duties required for this position

Job Requirements

• Metal fabrication experience
• Experience using CAD systems, PTC Creo preferred.
• Experiencein reading and interpreting mechanical parts and assembly drawings
• Experience with gas handling equipment, HVAC machinery, or gas process piping/tubing is desired.
• Knowledge of pneumatic, piping, and electromechanical automation systems preferred.
• Knowledge of manufacturing procedures, processes, materials, and finishes.
• Experience in project management.
• Experience with P&ID.
• Proficiency with MS Office (Word, Excel, and Outlook).
• US Citizenship (due to federal contracts in place, only US Citizens are eligible for consideration)

The ideal candidate

• Must have strong organizational skills and attention to detail
• Must have strong troubleshooting skills and possess the ability to resolve common problems
• Must be able to conduct themselves in a professional and courteous manner
• Must have excellent written and verbal communication skills and the ability to maintain accurate records
• Must be self-motivated with the ability to work efficiently with others

Education Requirements

Mechanical Engineering degree or equivalent

Location

General North Attleboro, MA

Training

Training will be provided for the right candidate. Training will primarily take place in the seacoast of NH, 2-3 days per week for the first 1-2 months. The candidate will be provided with hotel accommodations for training days. The remainder of the first 1-2 months will be spent on-site at the North Attleboro facility for remote training with the Project Engineering department.

Physical and Mental Requirements

• Physical Requirement: Must have fine motor skills;ability to do repetitive motion;and the ability to sit for most of the day. Must be able to drive to the NH headquarters for training and as needed for company-related purposes. Travel time between locations is approximately 2 hours.
• Visual Requirement: Must be able to visually read documents and a computer screen
• Hearing Requirement: N/A
• Mental Requirement: Comprehension, Reasoning, Decision Making, Communication, and Mathematics

 

#LI-CM1
]]> Mon, 13 Apr 2026 00:00:00 EDT 1  

Position Title: Assistant Chief Plant Operator  

NATURE OF WORK

Position performs responsible technical process control and supervisory work in the daily maintenance of the City’s water and/or wastewater infrastructure. Provides for the proper functioning of the facilities. Acts as Chief Plant Operator in the absence of Chief.

 

SUPERVISION

Incumbent works under general direction of the Chief Plant Operator, work is performed in accordance with standard practices and previous training, with substantial independence in determining the sequence and timing of duties and in planning and organizing the work activities. Incumbent uses judgment to solve problems of detail or unusual situations by adapting methods or interpreting instructions. Instructions for new assignments or special projects usually consist of statements of desired objectives, deadlines, and priorities. Technical and policy problems or changes in procedures are discussed with supervisor. Incumbent prepares and submits weekly reports on preventive maintenance status for the supervisor’s review. 

 

Position is responsible for the immediate supervision of treatment operations staff. Employees may work on different shifts and at different locations than the incumbent. Incumbent trains and evaluates employees and provides input for the discipline, hiring and firing of employees. Workload fluctuates predictably throughout the year.  Incumbent is on call for emergencies.

 

ESSENTIAL JOB FUNCTIONS

The essential functions or duties listed below are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if work is similar, related, or a logical assignment to, or extension of, the position.

1.     Oversees operations, maintenance and repair of all facility equipment and processes. Supervises and assigns staff;ensures for the safety and proper operation of equipment;provides or performs preventative maintenance and repairs, or replacement of equipment, as needed.

2.     Maintains and operates treatment facility equipment including pumps, motors, laboratory equipment, chemical injection systems, blowers, and other equipment essential to operations.

3.     Attends training sessions to obtain credits necessary to maintain a valid New Hampshire water or wastewater operator’s license and to remain current on new developments in the industry. 

4.     Maintains quality treated water or wastewater, with chemicals and procedures, to ensure compliance with State and EPA guidelines.

5.     Corresponds with customers, municipal, state, and federal officials and consultants regarding system facilities and operations.

6.     Administers employee safety programs and training, enforces all regulations, laws and applicable labor contracts. 

7.     Performs administrative duties for division;maintains records and data;develops record and report forms.

8.     May prepare and submit monthly reports according to city, state, and federal requirements. 

9.     Identifies, documents and schedule all preventative maintenance repairs.

10.  Is on call in the operator on-call rotation and is also available for emergencies.

11.   Orders and maintains adequate inventory and proper storage of equipment and supplies.

12.   Establishes and maintains necessary tools and equipment to perform duties.

13.   Maintain maintenance logbook. Ensure all station log books and daily sheets are current.

14.   Responsible for the appearance and cleanliness of tool rooms, equipment storage area, garages and maintenance trucks.

15.   Works on special projects and pilot projects in an effort to enhance plant operations;works with engineering firms on plant or equipment upgrades.

16.  Assists the Chief Plant Operator in the development and implementation of policies.

17.  Develops and oversees the implementation of standard operating procedures.

18.   Performs other duties as assigned by the supervisor.

 

REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES

An incumbent in this position consistently demonstrates a(n)…

1.     Working knowledge of mechanics, computer data experience, hydraulics, electronics, and PLC’s.

2.     Ability to prepare accurate reports.

3.     Strong computer skills.

4.     Ability to communicate effectively with the general public, City staff, and government officials at all levels.

 

ENVIRONMENT, WORKING CONDITIONS, PHYSICAL AND MENTAL EFFORT

Position requires examining, analyzing and evaluating the water and wastewater infrastructure and treatment systems and facilities, and determining any actions that need to be taken in its maintenance and/or repair. Judgment is needed to understand, interpret and comply with complex federal, state and local regulations as they pertain to the operation of the facilities.  Assignments typically involve evaluation and interpretation of factors, conditions or unusual circumstances;inspecting, testing or evaluating compliance with laws and regulations;gathering, analyzing and evaluating samples or data using specialized fact-finding techniques;and/or determining the methods to accomplish the work.

 

Errors can result in personal injury/loss, delay or loss of service, monetary loss, injury to others, damage to building, equipment, and legal repercussions.

 

Work is performed in treatment facility and field settings with moderate to loud noise level. Incumbent is required to talk listen/hear and use hands more than 2/3rd of the time;stand, walk, sit, reach with arms and hands, taste and smell up to 1/3rd of the time. Incumbent frequently lifts up to 30 pounds and seldom lifts up to 60 pounds. Incumbent is exposed to outdoor weather conditions, toxic or caustic chemicals, diseases, fumes or airborne particles, extremes of heat and cold and moving mechanical parts more than 2/3rd of the time;confined spaces and risk of electric shock up to 1/3rd of the time. Normal vision is required for the position. Equipment operated includes light trucks, automobile, light equipment, power and hand tools, office machines, computers, analyzers, meters, laboratory equipment, and electrical controls.

 

MINIMUM REQUIRED QUALIFICATIONS

A candidate for this position must have graduated from high school, or equivalent (GED). An Associate's Degree in Environmental Science, Engineering, Industrial Technology, or a related field is preferred. Five (5) years of experience in the operations and maintenance of a water and/or wastewater treatment facility or related field. Three (3) years of experience in a supervisory capacity. Qualifying education experience may count for some of this experience.



Hold a current New Hampshire Water or Wastewater Treatment Plant Operators Grade III license (or the equivalent from another state). Obtaining additional certification or licensing may be required.

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1  

Position Summary:

Note: This is a position for Sr. PM with experience in power industry, large boilers, furnaces, energy systems 

Relocation is available 

We are a driving force in power, committed to shaping the future of energy solutions. Driven by our core values of Teamwork, Integrity, and Performance, we enable our team to develop and deliver sustainable solutions for our customers. Join us in driving the science, technology and expertise that will serve the growing global demand for safe, reliable, clean energy.

Essential Responsibilities:

• Define project scope, goals and deliverables that support project requirements.
• Internal management of core project team and assigned engineering and third-party resources to accomplish project objectives on time and within budget.
• Plan and schedule project timelines and milestones.
• Identify and manage project dependencies and critical path.
• Represent business as single point contact for project's customers with respect to technical, commercial, schedule. Develop and negotiate for supplemental work and changes of project scope.
• Continuously monitor project(s) for potential problems and take a lead role to solve or preclude the problem.
• Prepare and issue progress reports and presentations to customers and management.
• Manage any contractual claims through speedy conclusions that is satisfactory to all parties.
• Implement and maintain project quality on projects assigned.  
• Control project procurement and approval of purchasing.

 

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Overview:

We are seeking a skilled Assembler to perform soldering, assembly, and related tasks for the manufacture of high-reliability frequency control and RF electronics products used in space, military, and commercial applications.

Key Responsibilities:

•Perform hand soldering of fine pitch surface mount and through-hole components

•Assemble wire harnesses and cable assemblies using measurement tools and schematics

•Conduct rework and repairs to existing assemblies

•Follow work instructions and quality standards (J-STD-001 Class 3 / IPC-610 Class 3)

•Inspect work using microscopes and ensure high workmanship standards

•Maintain organized workflow across multiple projects

•Collaborate on documentation and process improvements

Requirements:

•Proven experience soldering miniature SMT components

•Proficient with J-STD-001 or IPC-610 Class 3 standards

•Skilled in reading schematics and using measurement tools

•Ability to perform precise work under magnification

•Strong verbal and written communication skills

•Reliable, detail-oriented, and able to work with minimal supervision

Preferred Skills:

•Familiarity with identifying electronic components

•Experience using basic test equipment

•Basic computer skills

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 We are seeking an experienced Civil Engineer with a strong background in site and infrastructure design to join a collaborative engineering team. This role offers the opportunity to work on a wide range of development projects, contribute to complex engineering solutions, and support projects from planning through construction.

Key Responsibilities

·        Prepare construction plans, specifications, cost estimates, schedules, and design narratives

·        Develop site layouts, grading plans, drainage calculations, and roadway designs

·        Design water distribution and wastewater collection systems

·        Ensure all designs comply with applicable codes and regulatory requirements

·        Contribute to master development plans and comprehensive engineering studies

·        Review construction shop drawings for compliance with project specifications

·        Collaborate with multidisciplinary teams to resolve design and construction challenges

·        Maintain a high level of technical expertise through ongoing professional development

·        Adhere to all company and regulatory health and safety requirements

·        Perform additional duties as the project requires

Qualifications

·        Bachelor’s degree in Civil Engineering from an ABET-accredited institution

·        5 to 8 years of experience focused on site and infrastructure design

·        Professional Engineer (PE) license required

·        Strong organizational and time management skills with the ability to meet deadlines

·        Proficiency in Civil 3D, HydroCAD, and Microsoft Office 365 (Word, Excel, Outlook)

·        Strong written and verbal communication skills

·        Ability to work effectively in a team-oriented environment 

·        Possibly international travel.

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Machine Operator

 

Are you looking to build your career in machining and manufacturing? We’re seeking a CNC Machine Operator to join our team and play a key role in keeping production running smoothly. In this role, you’ll work hands-on with CNC machines, ensuring quality parts are produced to spec while learning and growing your technical skills.

What You’ll Do:

•Load and unload CNC machines and ensure parts meet quality standards.

•Inspect parts and troubleshoot basic issues during production.

•Read and interpret blueprints and drawings to complete jobs accurately.

•Use measuring tools such as micrometers, calipers, indicators, and gauges.

•Maintain safety and quality standards in a fast-paced production environment.

What We’re Looking For:

•High school diploma or equivalent.

•2+ years of CNC or machining experience preferred, but not required—we’re willing to train the right person.

•Basic machining knowledge and ability to use common inspection tools.

•Strong work ethic, reliability, and ability to work independently with minimal supervision.

•Team-oriented mindset and commitment to safety and quality.

•Must be authorized to work in the U.S. Full-time.
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 CNC Lathe Machinist III / Programmer

Are you a skilled machinist who enjoys taking a project from raw material to a finished, high-quality product? We’re looking for a CNC Lathe Machinist III / Programmer to join our team, where you’ll work with advanced multi-axis lathes, cutting-edge tooling, and modern programming software to deliver precision parts.

What You’ll Do:

• 
  Program, set up, and operate CNC multi-axis lathes.
  
• 
  Take metal from raw stock to finished product with minimal supervision.
  
• 
  Plan and lay out work directly from customer drawings and specifications.
  
• 
  Determine proper speeds, feeds, tolerances, and machining sequences.
  
• 
  Perform setups, make trial cuts, and fine-tune adjustments as needed.
  
• 
  Use precision measuring tools (micrometers, calipers, CMM, vision systems, etc.) to ensure accuracy.
  
• 
  Apply trigonometry and shop math to calculate complex angles and dimensions.
  
• 
  Work with modern software like Fusion360 (preferred) or Mastercam.
  
• 
  Contribute to a team environment while maintaining a strong personal work ethic.
  

What We’re Looking For:

 

• 
  High school diploma or equivalent.
  
• 
  5+ years of CNC machining experience preferred (but we’re open to less with the right skills and drive).
  
• 
  Strong technical knowledge of machining practices and cutting tools.
  
• 
  Ability to work independently while collaborating with a skilled team.
  

]]> Mon, 13 Apr 2026 00:00:00 EDT 1 We’re searching for a Registered Roofing Consultant / Engineer who’s motivated to take full ownership of challenging and rewarding building envelope projects. In this role, you’ll work on everything from modern facilities to buildings that have stood for more than a century —bringing your technical expertise into real-world environments every day.

You’ll be hands-on in the field, uncovering issues, providing assessments, and driving the right solutions. On the design side, you’ll help develop drawings and details, perform calculations, and prepare specifications. You’ll also support bidding, oversee construction progress, and help ensure the work gets done the right way.

This position offers the chance to be a trusted partner to clients and a leader within the team. You’ll contribute to strengthening relationships, support business development, and help deliver the kind of service that keeps clients coming back.

What you’ll bring:

•Bachelor’s degree in Civil or Architectural Engineering
•5+ years of experience focused on roofing, exterior cladding, siding, and waterproofing design
•Registered Roofing Consultant (RRC) required
•Strong communication skills, with the ability to collaborate and advise confidently

 

This is an opportunity to grow your expertise, expand your impact, and build a career path where leadership, development, and continuous learning are actively encouraged.
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 We’re looking for a driven Building Envelope Engineer / Project Manager who’s ready to take full ownership of meaningful, real-world projects. This role is a blend of design, investigation, and hands-on field work across structures that range from brand-new construction to buildings over a century old.

You’ll step into a key position where your expertise in building codes, renovation practices, and material systems will directly shape the solutions we deliver. Expect to be involved in everything from design calculations, drawings, and specifications to bid assistance and construction administration.

You’ll not only manage projects —you’ll manage relationships. Collaboration with clients, subcontractors, and internal teams will be a big part of your day, along with opportunities to participate in business development and help strengthen long-term partnerships.

What we’re looking for:

•Bachelor’s degree in Civil Engineering, Architectural Engineering, or a related discipline
•4+ years of experience in Building Technology, Structural Engineering, or Architectural Engineering
•E.I.T. Required;P.E. Preferred
•Strong understanding of building envelopes, modern materials, and restoration challenges
•A communicator who enjoys taking the lead and seeing projects through to success

 

If you want to grow your technical skills, strengthen your leadership, and play a visible role in a company’s future, this is a great opportunity to make an impact —and be recognized for it.
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Duties: Feeding trays of eggs in machine that cracks the egg and discards the shells.

Various production duties as needed.

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1 Responsibilities:

• Understanding, following, and updating production board as needed via tablets
• Verifying shirt counts against work orders
• Laying out/staging of blank garments for printing
• Quality control inspection at the end of the conveyor dryer
• Understand and maintain quality standards while keeping up with production expectations
• Keeping accurate counts of shirts as they print
• Accurately filling out each job work order as well as daily production numbers
• Helping out in other departments as needed

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1  

Dover, NH is seeking individuals for Full-time Production Operator Positions.

·    These positions require the ability to read and interpret detailed work instructions to build, inspect and test electronic components.

·    The work may include the assembly of intricate parts under a microscope. The position requires a steady hand and good hand coordination.

·    The ideal candidate will enjoy hobbies such as sewing, needlepoint, crafting, or working with small components, and microscopes.

·    Must demonstrate a continuous work history with excellent attendance. You will work in a team environment where good communication and interpersonal skills are essential.

 

Working Hours: Full time 6 am-2: 30 pm or 7: 00 am-3: 30 pm



 

 

Please be sure to remind candidates about these interview guidelines: 

 

1. Please emphasize [1] that our parts are quite small (often the size of a quarter or smaller) and require lots of hands-on assembly, [2] that hand-eye coordination and magnification use are very important, and [3] that the ability to follow very detailed Work Instructions is required. 

 

2. Please tell the candidate to expect to be on-site for one hour.

 

4. Since most of our interviews end with a tour of the Production Floor, please ask candidates to wear appropriate shoes. These are considered inappropriate for the Floor: open-toed shoes, heels, clogs or clog-style shoes, flip flops, sandals, or moccasin-type shoes. 

 

5. We provide protective eyewear for the tour and a guest locker for personal belongings. 

 

 

 

 
]]> Mon, 13 Apr 2026 00:00:00 EDT 1